Texas St Tech Coll
Keene State recognizes transferable credit for 29 courses at Texas St Tech Coll.
Transfer courses are evaluated in one of two ways, either they are equivalent to a specific course at Keene State College, or they are accepted as general equivalencies. Academic departments have the final say as to acceptance of credits you wish to apply toward major degree requirements and can help you determine the acceptability of your courses.
Don't see your courses below? Keene State may still recognize your credits – email us or call 603-358-2500 to speak with an academic advisor.
| Course | Credits | Equivalent |
|---|---|---|
| DDT 027 Technical Illustration |
2.68 | Technology, Design & Safety General |
| DDT 102 Bas Elecdraf/Theory |
2.68 | Technology, Design & Safety General |
| DDT 1104 General Drafting |
4.00 | Technology, Design & Safety General |
| DDT 120 Civil Eng Drafting I |
2.01 | Technology, Design & Safety General |
| DDT 1203 Mechanical Drafting I |
3.00 | Technology, Design & Safety General |
| DDT 1303 Architectural Draft |
3.00 | Technology, Design & Safety General |
| DDT 1403 Electro-Mech Drafting |
3.00 | Technology, Design & Safety General |
| DDT 1503 Comp Aided Drafting I |
3.00 | Technology, Design & Safety General |
| DDT 202 Mechanical Draft II |
2.68 | Technology, Design & Safety General |
| DDT 2103 Descriptive Geometry |
3.00 | Technology, Design & Safety General |
| DDT 218 FacilityLayout/Design |
2.01 | Technology, Design & Safety General |
| DDT 2203 Com Aided Draft II |
2.01 | Technology, Design & Safety General |
| DDT 2303 Print Cir Board Desgn |
2.01 | Technology, Design & Safety General |
| DDT 304 Dimension/Tolerance |
2.01 | Technology, Design & Safety General |
| DDT 3104 Electr-Mechandesign Proj |
2.68 | Technology, Design & Safety General |
| DDT 333 Survey & Relat Calcul |
2.68 | Technology, Design & Safety General |
| DDT 345 Intro Cad/Keyboarding |
2.00 | Technology, Design & Safety General |
| DDT 360 Mechanical Draft III |
2.01 | Technology, Design & Safety General |
| DDT 364 Civil Engin Draft II |
2.68 | Technology, Design & Safety General |
| DDT 365 Advanced Comp Graphics |
2.01 | Technology, Design & Safety General |
| DDT 374 Civil Engin Draft III |
2.01 | Technology, Design & Safety General |
| DDT 375 Computer Graphics |
2.68 | Technology, Design & Safety General |
| ENGL 1301 Composition I |
3.00 | ENG-101 Essay Writing |
| GT 1001 Orientation |
1.00 | Elective General |
| GT 262 World of Work |
1.34 | Elective General |
| MATH 1314 College Algebra |
2.01 | Mathematics General |
| MATH 1316 Plane Trigonometry |
2.01 | Mathematics General |
| PHYS 1401 College Physics I |
2.68 | Physics General |
| PSYC 2301 General Psychology |
2.01 | PSYC-101 General Psychology |
Additional Options:
Hours of Operation