Mason Library
QL508.B6 B6.
Bonhag, Philip Frederic, 1923-
Histological and histochemical studies on the ovary of the American cockroach Periplaneta americana (L.).
Berkeley, University of California Press, 1959.
TA403 .N332 1989.
National Research Council (U.S.). Committee on Materials Science and Engineering.
Materials science and engineering for the 1990s: maintaining competitiveness in the age of materials / Committee on Materials Science and Engineering [and] Solid State Sciences Committee, Board on Physics and Astronomy, Commission on Physical Sciences, Mathematics, and Resources, and National Materials Advisory Board, Commission on Engineering and Technical Systems, National Research Council.
Washington, D.C.: National Academy Press, 1989.
TA403 .P569 1988.
Pollack, Herman W.
Materials science and metallurgy / Herman W. Pollack.
Englewood Cliffs, N.J.: Prentice-Hall, c1988.
TA403 .S5916 1995.
Smallman, R. E.
Metals and materials: science, processes, applications / R.E. Smallman, R.J.
Bishop.
Oxford; Boston: Butterworth-Heinemann, 1995.
TA403.6 .A74 1999.
Ashby, M. F.
Materials selection in mechanical design / Michael F. Ashby.
Oxford, OX; Boston, MA: Butterworth-Heinemann, 1999.
TA403.6 .I54 1992.
Inorganic materials / edited by Duncan W. Bruce and Dermot O'Hare.
Chichester; New York: Wiley, c1992.
TA405 .D53 1976.
Dieter, George Ellwood.
Mechanical metallurgy / George E. Dieter.
New York: McGraw-Hill, c1976.
TA405 .F418 1984.
Felbeck, David K.
Strength and fracture of engineering solids / David K. Felbeck, Anthony G.
Atkins.
Englewood Cliffs, NJ: Prentice-Hall, c1984.
TA405 .G44 1990.
Gere, James M.
Mechanics of materials / James M. Gere, Stephen P. Timoshenko.
Boston: PWS-KENT Pub. Co., c1990.
TA405 .M883 1996.
Mott, Robert L.
Applied strength of materials / Robert L. Mott.
Englewood Cliffs, N.J.: Prentice Hall, c1996.
TA407 .L9.
Lysaght, Vincent E., 1900-
Hardness testing handbook, by Vincent E. Lysaght and Anthony DeBellis.
[Wilkes Barre? Pa., American Chain and Cable Co., 1969].
TA407 .S57. [Pt 1]
Small, Louis.
Hardness, theory and practice.
Ferndale, Mich., Service Diamond Tool Co. [1960-]
TA416 .R37 1990.
Ratliff, Thomas A.
The laboratory quality assurance system: a manual of quality procedures with related forms / Thomas A. Ratliff, Jr.
New York: Van Nostrand Reinhold, c1990.
TA417.25 .C65a. [vol. 27-28]
Conference on Application of X-ray Analysis.
Advances in x-ray analysis: proceedings of the ... annual Conference on Application of X-ray Analysis / edited by William M. Mueller and Marie Fay; sponsored by University of Denver, Denver Research Institute.
New York: Plenum Press, <1984>-
TA418.22 .P6 1985.
Poirier, Jean Paul.
Creep of crystals: high-temperature deformation processes in metals, ceramics, and minerals / Jean-Paul Poirier.
Cambridge [Cambridgeshire]; New York: Cambridge University Press, 1985.
TA418.42 .H37 1999.
Hardness testing / edited by Harry Chandler.
Materials Park, OH: ASM International, 1999.
TA418.74 .M39 1986.
Materials degradation caused by acid rain / Robert Baoian, editor; developed from a symposium sponsored by the Division of Industrial and Engineering Chemistry, Inc. at the 20th State-of-the-Art Symposium of the American Chemical Society, Arlington, Virginia, June 17-19, 1985.
Washington, DC: The Society, 1986.
TA418.74 .S92 1989.
Suzuki, Ichiro, 1935-
Corrosion-resistant coatings technology / Ichiro Suzuki.
New York: M. Dekker, c1989.
TA418.9.C6 C6318 1989.
Composites applications: the future is now / Thomas J. Drozda, editor.
Dearborn, Mich.: Society of Manufacturing Engineers, Publications Development Dept., Reference Publications Division, c1989.
TA418.9.C6 C6376 1988.
Conference on Advanced Composites (4th: 1988: Dearborn, Mich.).
How to apply advanced composites technology: proceedings of the Fourth Annual Conference on Advanced Composites, 13-15 September 1988, Dearborn, Michigan / sponsors, ASM International, Engineering Society of Detroit; endorsing sponsor, Society of Plastics Engineers.
[Metals Park, Ohio]: ASM International, c1988.
TA418.9.C6 C65 1995.
Composite manufacturing technology / edited by A.G. Bratukhin and V.S.
Bogolyubov.
London; New York: Chapman & Hall, 1995.
TA418.9.C6 M28 1993.
Mallick, P. K., 1946-
Fiber-reinforced composites: materials, manufacturing, and design / P.K.
Mallick.
New York: M. Dekker, c1993.
TA418.9.F5 D66 1990.
Donnet, Jean-Baptiste, 1923-
Carbon fibers / Jean-Baptiste Donnet, Roop Chand Bansal.
New York: M. Dekker, c1990.
TA418.9.S62 M38 1995.
Materials for smart systems: symposium held November 28-30, 1994, Boston, Massachusetts, U.S.A. / editors, Easo P. George ... [et al.].
Pittsburgh, PA: Materials Research Society, c1995.
TA444 .N38 1990.
Nawy, Edward G.
Reinforced concrete: a fundamental approach / Edward G. Nawy.
Englewood Cliffs, N.J.: Prentice Hall, c1990.
TA455.C43 M33 1990.
McColm, I. J.
Ceramic hardness / I.J. McColm.
New York: Plenum Press, c1990.
TA455.P5 B34 1998.
The basics of testing plastics: mechanical properties, flame exposure, and general guidelines / Stephen Burke Driscoll, editor.
West Conshohocken, PA: ASTM, c1998.
TA455.P5 T65.
Toughness and brittleness of plastics: a symposium / jointly sponsored by the Division of Organic Coatings and Plastics Chemistry of the American Chemical Society and by the Division of Engineering Properties and Structures of the Society of Plastics Engineers, at the 168th meeting of the American Chemical Society, Atlantic City, N.J., September 10-13, 1974; Rudolph D. Deanin and Aldo M. Crugnola, editors.
Washington: The Society, 1976.
TA455.P5 T87.
Turner, S. (Stanley).
Mechanical testing of plastics, [by] S. Turner.
London, Iliffe Books for the Plastics Institute, 1973.
TA455.P55 H3 1975.
Handbook of fiberglass and advanced plastics composites / edited by George Lubin.
Huntington, N.Y.: R. E. Krieger Pub. Co., 1975, c1969.
TA455.P58 B78.
Brydson, J. A.
Flow properties of polymer melts [by] J. A. Brydson.
London, Published for the Plastics Institute [by] Iliffe, 1970.
TA455.P58 E53 1990.
Engineering polymers / edited by R.W. Dyson.
Glasgow: Blackie; New York: Chapman and Hall, 1990.
TA455.P58 N48 1994.
Nielsen, Lawrence E.
Mechanical properties of polymers and composites / Lawrence E. Nielsen, Robert F. Landel.
New York: M. Dekker, c1994.
TA455.P58 O68 1996.
Osswald, Tim A.
Materials science of polymers for engineers / Tim A. Osswald, Georg Menges.
Munich; New York: Hanser; Cincinnati: Hanser/Gardner, c1996.
TA455.P58 P475 1996.
Physical properties of polymers handbook / editor, James E. Mark.
Woodbury, N.Y.: AIP Press, c1996.
TA455.P58 S48 1984.
Seymour, Raymond Benedict, 1912-
Structure-property relationships in polymers / Raymond B. Seymour and Charles E.
Carraher, Jr.
New York: Plenum Press, c1984.
TA455.P58 S49 1987.
Seymour, Raymond Benedict, 1912-
Polymers for engineering applications / Raymond B. Seymour.
[Washington]: ASM International, c1987.
TA455.R8 E54 1992.
Engineering with rubber: how to design rubber components / edited by Alan N.
Gent; with contributions by R.P. Campion ... [et al.].
Munich; New York: Hanser Publishers; New York: Distributed in the United States of America and in Canada by Oxford University Press, c1992.
TA459 .S28.
Samans, Carl Hubert, 1909-
Engineering metals and their alloys.
New York, Macmillan Co., 1949.
TA459 .T9.
Tweeddale, J. G.
The mechanical properties of metals, assessment and significance [by] J. G.
Tweeddale.
New York, American Elsevier Pub. Co. [c1964].
TA460 .A86 1987.
Atlas of stress-strain curves / edited by Howard E. Boyer.
Metals Park, Ohio: ASM International, c1987.
TA460 .C62 1974.
Colangelo, Vito J.
Analysis of metallurgical failures [by] V. J. Colangelo [and] F. A. Heiser.
New York, Wiley [1974].
TA460 .F58 1970.
Forrest, Peter George.
Fatigue of metals.
Oxford, New York, Pergamon Press, 1962.
TA460 .P83 1991.
Pugh, S. F. (Stanley Frederick), 1922-
An introduction to grain boundary fracture in metals / S.F. Pugh.
London: Institute of Metals, 1991.
TA460 .R55 1995.
Ross, Robert B.
Investigating mechanical failures: the metallurgist's approach / Bob Ross.
London; New York: Chapman & Hall, 1995.
TA462 .B88.
Butler, George, 1924-
Corrosion and its prevention in waters [by] G. Butler [and] H.C.K. Ison.
New York, Reinhold Pub. Corp., 1966.
TA481 .D45 1990.
Delmonte, John.
Metal/polymer composites / John Delmonte.
New York: Van Nostrand Reinhold, c1990.
TA492.B63 B5 1990.
Bickford, John H., 1926-
An introduction to the design and behavior of bolted joints / John H. Bickford.
New York: M. Dekker, c1990.
TA545 .P83 1975b.
Pugh, John Charles.
Surveying for field scientists / J. C. Pugh.
Pittsburgh: University of Pittsburgh Press, 1975.
TA549 .L29 1996.
Land development handbook: planning, engineering, and surveying / Dewberry & Davis; editor-in-chief, Sidney O. Dewberry; coordinating editor, John S.
Matusik.
New York: McGraw-Hill, c1996.
TA571 .L82.
Low, Julian William, 1904-
Plane table mapping.
New York, Harper [1952].
TA595 .L39 1983.
Laurila, Simo H. (Simo Heikki), 1920-
Electronic surveying in practice / Simo H. Laurila; with a contribution by David W. Harris.
New York: Wiley, 1983.
TA633 .L38.
Lauer, Kenneth R.
Structural engineering for architects / Kenneth R. Lauer.
New York: McGraw-Hill, c1981.
TA636 .L53 1989.
The Life of structures: physical testing / edited by G.S.T. Armer, J.L. Clarke, F.K. Garas.
London; Boston: Butterworths, 1989.
TA642 .W28 1973.
Wang, Chu-Kia, 1917-
Introductory structural analysis with matrix methods.
Englewood Cliffs, N.J. Prentice-Hall, c1973.
TA645 .V67 1986.
Vossoughi, Jafar.
Statics for architects / Jafar Vossoughi.
New York: Van Nostrand Reinhold, c1986.
TA666 .A49.
American Institute of Timber Construction.
Timber construction manual; a manual for architects, engineers, contractors, laminators and fabricators concerned with engineered timber buildings and other structures.
New York, Wiley, 1966.
TA666 .T5.
Timber Engineering Company.
Timber design and construction handbook.
New York, F.W. Dodge Corp. [1956].
TA666 .W63 1997.
Wood engineering and construction handbook / Keith F. Faherty, editor, Thomas G.
Williamson, editor.
New York: McGraw Hill, c1997.
TA684 .J25. [vol. 1-2]
James F. Lincoln Arc Welding Foundation.
Modern welded structures.
Cleveland [1963-1970].
TA684 .S793 2001.
Structural steel selection considerations: a guide for students, educators, designers, and builders / Reidar Bjorhovde ... [et al.].
Reston, VA: Structural Engineering Institute, American Society of Civil Engineers, c2001.
TA1145 .K48 1990.
Khisty, C. Jotin, 1928-
Transportation engineering: an introduction / C. Jotin Khisty.
Englewood Cliffs, N.J.: Prentice Hall, c1990.
TA1205 .N37 1976.
National Research Council (U.S.). Transportation Research Board.
Innovations in transportation system planning / Transportation Research Board, Commission on Sociotechnical Systems, National Research Council.
Washington: National Academy of Sciences, 1976.
TA1634 .C52 1996.
Chang, S. K. (Shi Kuo), 1944-
Symbolic projection for image information retrieval and spatial reasoning / Shi- Kuo Chang, Erland Jungert.
London; San Diego: Academic Press, c1996.
TA1637 .G76 1994.
Grotta, Sally Wiener, 1949-
Digital imaging for visual artists / by Sally Wiener Grotta, Daniel Grotta.
New York: Windcrest/McGraw-Hill, 1994.
TA1637 .J34 1997.
Jahne, Bernd, 1953-
Digital image processing: concepts, algorithms, and scientific applications / Bernd Jahne.
Berlin; New York: Springer, c1997.
TA1637 .R87 1995.
Russ, John C.
The image processing handbook / John C. Russ.
Boca Raton: CRC Press, c1995.
TA1673 .L3723 1989.
Lasers in manufacturing: proceedings of the 6th international conference, 10-11 May 1989, Birmingham, UK / edited by W.M. Steen.
Bedford, UK: IFS Publications; Berlin; New York: Springer-Verlag, c1989.
TA1675 .H67 1988.
Horn, Delton T.
Laser experimenter's handbook / Delton T. Horn.
Blue Ridge Summit, PA: TAB Books, c1988.