CML CURR/VOC T&I METAL MAVCC 1983b
Basic sheet metal layout and fabrication / written by Leonard Jones and Otto Morse ; edited by Dan Fulkerson ; developed by the Mid-America Vocational Curriculum Consortium, Inc
Stillwater, Okla. : Mid-America Vocational Curriculum Consortium, Inc., c1983

CML CURR/VOC T&I METAL.W MAVCC 1984b
Welding blueprint reading and layout / written by Clarence Fortney and Mike Gregory ; edited by Dan Fulkerson
Stillwater, Okla. : Mid-America Vocational Curriculum Consortium, Inc., c1984

CML CURR/VOC T&I METAL.W MAVCC 1984g
GTAW, gas tungsten arc welding / written by Clarence Fortney and Mike Gregory, edited by Dan Fulkerson, developed by the Mid-America Vocational Curriculum Consortium, Inc
Stillwater, Okla. : Mid-America Vocational Curriculum Consortium, Inc., c1984

CML CURR/VOC T&I METAL.W MAVCC 1992c
Gas tungsten arc welding and plasma arc cutting / written by Clarence Fortney, Mike Gregory and Larry New ; developed by The Mid-America Vocational Curriculum Consortium
Stillwater, OK : Mid-America Vocational Curriculum Consortium, 1992

CML CURR/VOC T&I METAL.W MAVCC 1992g
Gas metal arc welding and flux-cored arc welding / written by Clarence Fortney and Mike Gregory ; technical consultant, Larry New ; project coordinated by Dan Fulkerson ; developed by the Mid-America Vocational Curriculum Consortium, Inc
Stillwater, OK : The Consortium, c1992

CML CURR/VOC T&I METAL.W MAVCC 1992p
Shielded metal arc pipe welding / written by Clarence Fortney, Mike Gretory and Larry New ; developed by The Mid-America Vocational Curriculum Consortium, Inc.
Stillwater, OK : Mid-America Vocational Curriculum Consortium, 1992

CML CURR/VOC T&I METAL.W MAVCC 1992s
Shielded metal arc welding / written by Clarence Fortney and Mike Gregory
Stillwater, OK : Mid-America Vocational Curriculum Consortium, Inc., c1992

CML CURR/VOC T&I METAL.W MAVCC 1992x
Oxyacetylene welding and cutting / written by Clarence Fortney and Mike Gregory
Stillwater, OK : Mid-American Vocational Curriculum Consortium, c1992

CML D2253CURR/VOC T&I METAL.W MOA 1988
Welding : module 5 : gas metal arc welding / written by Roger Day
Columbia, MO : University of Missouri-Columbia, 1988

CML TK4660 .B4 1992
Basics of GMAW & GTAW : gas metal arc welding, gas tungsten arc welding / F. Richard Beard
Athens, Ga. : American Association for Vocational Instructional Materials, c1992

CML TK4660 .R47 1985
Resistance welding : [videorecording] : Course 211 / GCITC
Cincinnati, OH : Greater Cincinnati Industrial Training Corporation : [Metcut Research Associates], c1985

CML TS227 .A64
Guide for the training and qualification of welding personnel: entry level welder / prepared by American Welding Society; Education Dept
Miami, FL : American Welding Society, c1995, 1996

CML TS227 .A66
Specification for qualification and certification for entry level welders / prepared by the AWS Education and Certification Department
Miami, FL : American Welding Society, c1995, 1996

CML TS227 .B69 1997
Welding technology fundamentals / by William A. Bowditch and Kevin E. Bowditch
Tinley Park, Ill. : Goodheart-Willcox Co., c1997

CML TS227 .D87 1995
Duty task list: welding, / OD 1017
Stillwater, Okla. : Oklahoma Dept. of Career and Technology Education, c1995

CML TS227 .M48 1997
Welding skills / R.T. MIller
Homewood, Ill. : American Technical Publishers, c1997

CML TS227 .M557 1997
Modern welding : complete coverage of the welding field in one easy-to-use volume! / by Andrew D. Althouse ... [et al.]
Tinley Park, Ill. : Goodheart-Willcox, c1997

CML TS227.2 .T72 1999
Trainee guide. Industrial welding / National Center for Construction Education and Research
Upper Saddle River, NJ : Prentice-Hall, c1999-2000

CML TS227.55 .S36 1975
Practical problems in mathematics for welders / Frank R. Schell, [William Matlock]
Albany : Delmar Publishers, c1975

CML TS227.7 .H43 1994
Heavy metal [videorecording] : hot careers in welding
[Appleton, Wis.] : Miller Electric Mfg. Co., [1994?]

CML TS238 .W46 1993
Welding / American Lung Association
S.l. : American Lung Association, 1993

CML TS250 .S35 1973
Practical problems in mathematics for sheet metal technicians [by] Fred W. Schumacher
Albany, Delmar Publishers [1973]